This reading will automatically be stored in the memory. 6.Eject the Used Test Strip and Remove the Lancet To eject the test strip, point the strip at a sharp disposal container.

Due to its compact size and easy operation, you can use the GlucoRx Nexus Blood Glucose Monitoring System to easily monitor your blood glucose levels by yourself anywhere, any time.

Use the device only for the intended use described in this manual.

Do not use accessories which are not supplied by the manufacturer.

Do NOT use the device if it is not working properly or if it is damaged.

If you believe you are suffering from severe dehydration, consult a healthcare professional immediately.

If your blood glucose results are lower or higher than usual, and you do not have any symptoms of illness, first repeat the test.

It is intended to be used for the quantitative measurement of glucose (sugar) in fresh whole blood samples from the finger.

DISPLAY SCREEN M BUTTON Enter the meter memory and silence a reminder alarm.

TEST SLOT Insert test strip here to turn the meter on for testing.

Front Back NOTE The GlucoRx Nexus meter should only be used with GlucoRx Nexus Test Strips.

Using other test strips with this meter can pro- duce inaccurate results.

To Enter the Setting Mode Start with the meter off (no test strip inserted).

The meter displays On or OFF and press M button to turn on or turn off to set the first reminder alarm.

Press M button to select On, then press SET to set the hour.

Modes Use when any time of day, regardless of time since General (displays as Gen) last meal no food intake for at least 8 hours 2 hours after a meal testing with the control solution You can switch between each mode by.

Do a control solution test when: you first receive the meter, at least once a week to routinely check the meter and test strips, you begin using a new vial of test strips.

If you press M button again, the QC will disappear and this test is no longer a control solution test.

If not, please read instructions again and repeat the control solution test.

Stimulating blood perfusion by rubbing the puncture site before blood extraction has a significant influence on the glucose value obtained.

Please follow the suggestions below before obtaining a drop of blood: Wash and dry your hands before starting.

Insert the Test Strip to Turn on the Meter Wait for the meter to display the test strip and blood drop symbols with Gen preset.

Select the appropriate measuring mode by pressing M button.

For selecting the measuring mode, please refer to the FOUR MEASURING MODES.

Blood will be drawn in and after the confirmation window is completely filled, the meter begins counting down.

NOTE Do not press the site against the test strip or try to smear the blood.

This reading will automatically be stored in the memory.

Eject the Used Test Strip and Remove the Lancet To eject the test strip, point the strip at a sharp disposal container.

Glucotrend 2 User Manual